Material Data Sheets

Technical Data Sheets - Rubber Lining Compounds*

ARL/75 CRE - General Purpose Ebonite

ARL/50 WQB -WRAS Listed Butyl

ARL/45 AR - High Quality Soft Natural Rubber

ARL/68 AS - Abrasion Resistant Anti-Static-Rubber

ARL/55 B - High Quality Halobutyl

ARL/68 SHH - Hypalon (suitable for Sodium Hypochlorite)


* Notes:

A)   Many other lining / coating materials are available including white food quality materials, and WRAS listed materials for potable water. Please enquire for further details.

B)  Information on lining materials is given in good faith but without liability on our part, and may be revised/amended without notice. We accept no responsibility for the performance of any lining materials used without our knowledge or recommendation for a specific application, and /or without a purchase order placed on Applied Rubber Linings Ltd.

ARL/75 CRE - General Purpose Ebonite

Material Reference : ARL/75 CRE
Description & Application : FOR SPECIFIC APPLICATIONS PLEASE CONTACT APPLIED RUBBER LININGS LIMITED.
ARL/75 CRE is a high quality flexible ebonite specifically compounded for use as a plant lining material. It is highly resitant to many acids and common chemicals, and is also flexible after vulcanisation. ARL/75 CRE is non-conductve.
Temperature Range : 0° to 90°c (Depending upon application)
In common with all ebonites flexibility decreases with temperature decrease.
Specific Gravity : 1.36.
Hardness : 75°± 5°SHORE 'D'..
Tensile Strength : 16. MPA.
Elongation At Break : 11%
Compression Set : N/A
Electrical Resistivity : 6 x10 ohm - cm approx.
Health & Safety : See COSHH assessments.
Typical Applications : Electroplating tanks, chemical storage tanks & vessels, pipework, pump parts.
Disclaimer: Information on lining materials is given in good faith but without liability on our part, and may be revised/amended without notice. We accept no responsibility for the performance of any lining materials used without our knowledge or recommendation for a specific application, and /or without a purchase order placed on Applied Rubber Linings Ltd


ARL/50 WQB - WRAS Listed Butyl

Material Reference : ARL/50 WQB WRAS Listed Butyl
Description & Application :

FOR SPECIFIC APPLICATIONS PLEASE CONTACT APPLIED RUBBER LININGS LIMITED.
ARL/50 WQB is a high quality butyl compound for use as a plant lining material, and specifically for contact with potable water. ARL/50 WQB is also resistant to many common chemicals but is not suitable for long term contacts with acids.
 ARL/50 WQB is also compliant with FDA Regulation 177.2600 for contact with food.

Temperature Range : -20° to 130°c (Depending upon application)
Note: WRAS Listing is for cold potable water applications only.
Specific Gravity : 1.27
Hardness : 50°± 5° I.R.H.D
Tensile Strength : 11.0 MPA.
Elongation At Break : 630%
Compression Set : N/A
Electrical Resistivity : >10 Ohm - Cm.
Health & Safety : See COSHH assessments.
Typical Applications : Vessels, pipework, flowmeters etc. for use with potable water.
Disclaimer: Information on lining materials is given in good faith but without liability on our part, and may be revised/amended without notice. We accept no responsibility for the performance of any lining materials used without our knowledge or recommendation for a specific application, and /or without a purchase order placed on Applied Rubber Linings Ltd


ARL/45 AR - High Quality Soft Natural Rubber

Material Reference : ARL/45 AR
Description & Application : FOR SPECIFIC APPLICATIONS PLEASE CONTACT APPLIED RUBBER LININGS LIMITED.
ARL/45 AR is a high quality soft natural rubber, with good resistance to acids and many chemicals, plus high abrasive resistance and flexibility.
Temperature Range : - 20° to 70°c (Depending upon conditions and applications)
Specific Gravity : 1.08 - 1.11
Hardness : 45°± 5°SHORE 'A'.
Tensile Strength : 16.3 MPa.
Elongation At Break : 572%
Compression Set : 29.4%
Electrical Resistivity : >10 ohm - cm.
Health & Safety : See COSHH assessments.
Typical Applications : Slurry tanks & pipework, sand washing plant, agitators and mixers.
Disclaimer: Information on lining materials is given in good faith but without liability on our part, and may be revised/amended without notice. We accept no responsibility for the performance of any lining materials used without our knowledge or recommendation for a specific application, and /or without a purchase order placed on Applied Rubber Linings Ltd


ARL/68 AS - Abrasive Resistant Anti-Static Rubber

Material Reference : ARL/68 AS
Description & Application : FOR SPECIFIC APPLICATIONS PLEASE CONTACT APPLIED RUBBER LININGS LIMITED.
ARL/68 AS is a very hard wearing abrasive resistant natural rubber compound. Its electrically conductive properties enable it to be used in applications where static build up is a problem. This material also has good weather resistant properties and moderate chemical resistance.
Temperature Range : -40° to 85 °c
Specific Gravity : 1.16.
Hardness : 63-73
Tensile Strength : 13.3 MPA.
Elongation At Break : 375%
Compression Set : 23.5%
Electrical Resistivity : 1 x10 to 1 x10 Ohms
Health & Safety : See COSHH assessments.
Typical Applications : Rubber lining of shotblasting plant and equipment.
Disclaimer: Information on lining materials is given in good faith but without liability on our part, and may be revised/amended without notice. We accept no responsibility for the performance of any lining materials used without our knowledge or recommendation for a specific application, and /or without a purchase order placed on Applied Rubber Linings Ltd


ARL/55 B - High Quality Halobutyl

Material Reference : ARL/55 B
Description & Application : FOR SPECIFIC APPLICATIONS PLEASE CONTACT APPLIED RUBBER LININGS LIMITED.
ARL/55 B is a high quality black halobutyl specially compounded for plant lining applications. The material has excellent resitance to many acids and chemicals at high temperatures.
Temperature Range : -20° to 110°c (Depending upon application)
Specific Gravity : 1.21 g/cm³.
Hardness : 55°± 5°SHORE 'A'.
Tensile Strength : 6.48 MN /m²
Elongation At Break : 700%
Compression Set : N/A
Electrical Resistivity : N/A
Health & Safety : See COSHH assessments.
Typical Applications : Tanks,vessels & pipework for the chemical industry.
Disclaimer: Information on lining materials is given in good faith but without liability on our part, and may be revised/amended without notice. We accept no responsibility for the performance of any lining materials used without our knowledge or recommendation for a specific application, and /or without a purchase order placed on Applied Rubber Linings Ltd


ARL/68 SHH - Hypalon (suitable for Sodium Hypochlorite)

Material Reference : ARL/68 SHH Drab Hypalon
Description & Application : FOR SPECIFIC APPLICATIONS PLEASE CONTACT APPLIED RUBBER LININGS LIMITED.
ARL/68 SHH is a drab Hypalon used for a variety of applications where resistance to severe chemical environments is required, The compound has excellent resitance to sodium hypochlorite solution and will not give any decomposition or contamination of the solution..
Temperature Range : Up to 100°c (Depending upon application)
Specific Gravity : 1.62.
Hardness : 68 °± 5° SHORE 'A'
Tensile Strength : 10.4. MN/M².
Elongation At Break : 520%
Compression Set : N/A
Electrical Resistivity : N/A.
Health & Safety : See COSHH assessments.
Typical Applications : Pipes & fittings, storage tanks etc. for handling Sodium Hypochlorite
Disclaimer: Information on lining materials is given in good faith but without liability on our part, and may be revised/amended without notice. We accept no responsibility for the performance of any lining materials used without our knowledge or recommendation for a specific application, and /or without a purchase order placed on Applied Rubber Linings Ltd

 

Applied Rubber Linings
6 Chancel Close
Eastern Avenue
Gloucester
GL4 3SN

Tel: 01452 381849
Fax: 01452 381845